Kevin
保密
保密
保密
设计制造双机单轴齿轮箱 发表于:2008-11-25 20:46

I need a dual input / single output 1:1 gearbox

Input power will be 2ea. 600hp diesel engines @ 2100rpm, connected to gearbox through a fluid coupling PTO.

In the application the customer plans to have 1 engine at idle and 1 at speed. When the machine requires all the horsepower the second engine will come up to speed and the fluid coupling will engage.

The engines are to be set side by side, input shafts of gearbox should have a center distance of 38” min to 48” max.

This is a severe application and a service factor of 2 should probably be used.

Looking for a 1pc prototype with yearly usage of 20-30 units if prototype works.

Is this something your company would be interested in?

 

需要双入单出速率11的齿轮箱

每个输入柴油内燃机600马,2100转,通过液力耦合器链接到齿轮箱

在工作时,一个工作一个闲置。当全速工作时,两个发动机加上液力耦合器一起运作。

要考虑到两个发动机的利用率,不能长期一个工作一个闲置。要交换的来用

并排放置两个发动机,两个发动机的轴之间的距离最小30"最大48"

做一台样机,如果样机工作正常每年20-30套。

 

1、  液力耦合器由外商自己配备,装在齿轮箱外

2、  两输入轴和一输出轴同方向旋转

3、  本齿轮箱主要用于磨木机,即将木条磨成粉末

 


管理 版权所有 Copyright © 2008 杭州南方通达齿轮有限公司 浙ICP备09003438号